{"examType":"formal","durationSeconds":3600,"paperHash":"f9ae0474f0eadf400ced8ef3c00c47d2e11bc8ff330223e86cf95a46d004932c","totalScore":100,"questions":[{"id":1,"key":"q-001","type":"single_choice","stem":"在数字传输系统中，通常（ ）用于地面传输，QPSK用于卫星传输。","options":["PSM","PDM","QAM","FSK"],"score":1},{"id":2,"key":"q-002","type":"single_choice","stem":"一电感线圈接到f=50Hz的交流电路中，感抗XL=50Ω，若改接到f=150Hz的电源时，则感抗XL为（ ）Ω。","options":["150","250","10","60"],"score":1},{"id":3,"key":"q-003","type":"single_choice","stem":"缩写 \"RF\" 通常代表什么","options":["射频（Radio Frequency）","遥控反馈（Remote Feedback）","红外线（Infrared）","雷达频率（Radar Frequency）"],"score":1},{"id":4,"key":"q-004","type":"single_choice","stem":"值班员发现电视墙监测系统显示单个频道开路单声道音频丢失，如果信号源没有问题，接下来应该检查哪里？","options":["对应频道的开路输入接头","监测系统的电源","监测系统的软件设置"],"score":1},{"id":5,"key":"q-005","type":"single_choice","stem":"一负载接到电压U为220V单相交流电路中，电路电流I为5A，功率因数cosφ为0.8，求该电路视在功率S和有功功率P值符合下列选项（ ）。","options":["2200VA.1760W","2200VA,1320W","1100VA，660W","1100VA，880W"],"score":1},{"id":6,"key":"q-006","type":"single_choice","stem":"技术安全事故的三个属性是随机性、偶然性、______。","options":["可控性 ","必然性"," 可预测性"," 不确定性"],"score":1},{"id":7,"key":"q-007","type":"single_choice","stem":"当带电体有接地故障时，有故障电流流入大地，人在接地点周围两脚之间出现的电压称为（ ）。","options":["短路电压","接触电压","跨步电压","故障电压"],"score":1},{"id":8,"key":"q-008","type":"single_choice","stem":"对称三相电路中，不论负载是星形连接还是三角形连接，三相负载的有功功率都等于线电压、线电流和功率因数三者乘积的（ ）倍。","options":["2","V2","3","V3"],"score":1},{"id":9,"key":"q-009","type":"single_choice","stem":"短波的传播主要依靠(    )。","options":["天波","地波","散射波","空间波"],"score":1},{"id":10,"key":"q-010","type":"single_choice","stem":"在我台微波传输系统中，ODU(室外单元)的主要功能是（）。","options":["解码信号","放大信号","发送和接收微波信号","调制信号"],"score":1},{"id":11,"key":"q-011","type":"single_choice","stem":"目前发射台站SDH光传输设备8300输出的是（ ）信号。","options":["IP","卫星","微波","模拟"],"score":1},{"id":12,"key":"q-012","type":"single_choice","stem":"电容器在直流稳态电路中相当于（ ）。","options":["短路","开路","高通滤波器","低通滤波器"],"score":1},{"id":13,"key":"q-013","type":"single_choice","stem":"某单位在迎接网络安全检查的时候，被检查单位需要填写单位门户网站域名。请问下面选项中哪个是正确的？","options":["glfst@guilin.gov.cn","202.103.224.68","www.glfst.gov.cn","127.0.0.1"],"score":1},{"id":14,"key":"q-014","type":"single_choice","stem":"根据GY/T 179-2001标准，广播电视发射台的主要任务包括以下哪项？","options":["确保设备稳定运行于最佳状态","定期测试、调试设备的技术指标","降低能源、器材等的消耗","所有以上任务"],"score":1},{"id":15,"key":"q-015","type":"single_choice","stem":"下列不属于非线性失真的有（ ）。","options":["互调失真","截止失真","频率失真","饱和失真"],"score":1},{"id":16,"key":"q-016","type":"single_choice","stem":"在纯电感交流电路中，电压和电流的相位关系为（ ）。","options":["电流超前电压90ﾟ","电流滞后电压90ﾟ","电流超前电压180ﾟ","电流滞后电压180ﾟ"],"score":1},{"id":17,"key":"q-017","type":"single_choice","stem":"电器设备未经验电，一律视为（    ）。","options":["有电，不准用手触及   ","无电，可以用手触及","无危险电压"],"score":1},{"id":18,"key":"q-018","type":"single_choice","stem":"灯泡上标有“220V，40W”的字样，其意义是（ ）。","options":["接在220V以下的电源上，其功率是40W","接在220V电源上，其功率是40W","接在220V以上的电源上，其功率是40W"],"score":1},{"id":19,"key":"q-019","type":"single_choice","stem":"中波全固态发射机的功放采用的放大器件是（    ）。","options":["双极型晶体管","电子管","场效应晶体管","电感"],"score":1},{"id":20,"key":"q-020","type":"single_choice","stem":"感应电流所产生的磁通总是企图（ ）原有磁通的变化。","options":["影响","增强","阻止","衰减"],"score":1},{"id":21,"key":"q-021","type":"single_choice","stem":"人体受到电击时，人体电阻愈（ ），流过的电流愈大，人体所受到的伤害愈大。","options":["大","小","无关"],"score":1},{"id":22,"key":"q-022","type":"single_choice","stem":"在调频广播系统中，调频波的瞬时频率偏离载波频率的量与（   ）。","options":["调制信号的瞬时值成比例","载波频率的振幅成比例","载波相位的变化成比例","调制信号的频率成比例"],"score":1},{"id":23,"key":"q-023","type":"single_choice","stem":"调频广播是通过调整什么来传输音频信号？","options":["调整相位","调整幅度","调整频率","调整波长"],"score":1},{"id":24,"key":"q-024","type":"single_choice","stem":"SDH传输系统的主要传输损伤是:（ ）。","options":["误码、失真、延时、抖动","误码、漂移、色散、损耗","误码、失真、漂移、损耗","误码、抖动、漂移、延时"],"score":1},{"id":25,"key":"q-025","type":"single_choice","stem":"利用传输线变压器功率合成电路进行两个功放单元的功率合成，其输出功率为240W，若其中一个功放单元损坏，则合成电路的输出功率和平衡电阻上损耗的功率分别为（ ）。","options":["120W:120W","120W;60W","60W:60W","60W:120W"],"score":1},{"id":26,"key":"q-026","type":"single_choice","stem":"如果我台台区发生电气火灾，应先切断电源再扑救，但不知或不清楚开关在何处时，应剪断电线，剪切时要（     ）。 ","options":["几根线迅速同时剪断   ","不同相线在不同位置剪断 ","在同一位置一根一根剪断"],"score":1},{"id":27,"key":"q-027","type":"single_choice","stem":"调频信号的解调方式通常采用（ ）。","options":["包络检波","同步检波","鉴频器","相敏检波"],"score":1},{"id":28,"key":"q-028","type":"single_choice","stem":"调频（FM）工作在甚高频VHF波段(         )范围。而我们收听立体声广播的频率具体的范围只在87MHz—108MHz。","options":["300MHz至900MHz","100KHz至400KHz","30MHz至300MHz","1645KHz至2000KHz"],"score":1},{"id":29,"key":"q-029","type":"single_choice","stem":"为了提高电视发射天线的增益，多采用增加天线层数的办法，层数增加一倍，天线总增益增加约（ ）dB，垂直面方向图主瓣宽度相应减小。","options":["2","3","4","5"],"score":1},{"id":30,"key":"q-030","type":"single_choice","stem":" 正弦波的三要素是指（    ）。","options":["振幅、频率、周期","最大值、频率、相位","有效值、角频率、周期","振幅、角频率、初相位"],"score":1},{"id":31,"key":"q-031","type":"single_choice","stem":"若发射天线带宽不足，可采用（ ）的方法增加天线带宽。","options":["增大天线增益","增加天线层数","加大天线振子直径","加大天线长度"],"score":1},{"id":32,"key":"q-032","type":"single_choice","stem":"如果台区火灾时燃烧着的油流入电缆沟，适宜使用的灭火器材为（    ）。","options":["二氧化碳     ","泡沫覆盖 ","干粉"],"score":1},{"id":33,"key":"q-033","type":"single_choice","stem":"要使LC回路的频率增大，可采用的方法有（ ）。","options":["减小电容器两极板的间距","增大两极板的正对面积","在线圈中插入铁芯","减少线圈的匝数"],"score":1},{"id":34,"key":"q-034","type":"single_choice","stem":"什么是UPS的作用","options":["调节电压"," 提供持续电源"," 过滤电流","扩展存储空间"],"score":1},{"id":35,"key":"q-035","type":"single_choice","stem":"根据《广播电视安全播出管理规定》，我国广播电视安全播出事故不包括（）","options":["责任事故","技术事故","安全事故","其他事故"],"score":1},{"id":36,"key":"q-036","type":"single_choice","stem":"交流电流表指示的电流值，表示的是交流电流的（ ）值。","options":["有效","最大","平均","峰-峰"],"score":1},{"id":37,"key":"q-037","type":"single_choice","stem":"调频（FM）广播的特点不包括（    ）。","options":["抗干扰性能好","占用的频带较窄","传输时信号失真小"," 设备利用率较高"],"score":1},{"id":38,"key":"q-038","type":"single_choice","stem":"下面选项中不属于影响SDH传输网传输性能的主要指标是（  ）。","options":["误码","抖动 ","帧长","漂移"],"score":1},{"id":39,"key":"q-039","type":"single_choice","stem":"人体电阻由体内电阻、（ ）组成。","options":["接触电阻","表皮电阻","绝缘电阻","接地电阻"],"score":1},{"id":40,"key":"q-040","type":"single_choice","stem":"二级保障要求的区直属发射台、地市自建发射台安全播出年度运行指标应满足()。","options":["可用度≥99.992%","可用度≥99.983%","可用度≥99.95%"],"score":1},{"id":41,"key":"q-041","type":"single_choice","stem":"在我台的微波传输系统中，NEC数字微波发射机的主要功能是（）。","options":["解码信号"," 发射数字微波信号","调制信号","放大信号"],"score":1},{"id":42,"key":"q-042","type":"single_choice","stem":"安全播出责任单位应当按照《广播电视安全播出管理规定》有关要求，对所监测的事件事故的音视频或码流、应急处置及调查情况等信息进行完整记录，保存（）以上。","options":["3个月","6个月","一年","二年"],"score":1},{"id":43,"key":"q-043","type":"single_choice","stem":"数字微波系统台站基本信息表中的“波道带宽”和“最大功率”两个参数，对于发射机的性能有哪些影响？","options":[" 波道带宽决定了发射机的覆盖范围，最大功率决定了信号的传输质量。","波道带宽决定了信号的传输速率，最大功率决定了发射机的覆盖范围。","波道带宽和最大功率共同决定了发射机的信号稳定性和覆盖范围。","波道带宽和最大功率仅与发射机的能耗有关。"],"score":1},{"id":44,"key":"q-044","type":"single_choice","stem":"设某模拟信号的频谱范围是1kHz-15kHz，则合理的抽样频率是（ ）。","options":["1kHz","15kHz","20kHz","33kHz"],"score":1},{"id":45,"key":"q-045","type":"single_choice","stem":"信源编码又称数据压缩编码，主要是解决信号在传输过程中的（    ）。","options":["有效性","灵活性","可靠性","计划性"],"score":1},{"id":46,"key":"q-046","type":"single_choice","stem":"进网作业电工，应认真贯彻执行（ ）的方针，掌握电气安全技术，熟悉电气安全的各项措施，预防事故的发生。","options":["安全第一，预防为主","安全重于泰山","科学技术是第一生产力","人民电业为人民"],"score":1},{"id":47,"key":"q-047","type":"single_choice","stem":"函数F=AB+BC，使F=1的输入ABC组合为（ ）。","options":["ABC=000","ABC=010","ABC=101","ABC=110"],"score":1},{"id":48,"key":"q-048","type":"single_choice","stem":"使用剥线钳时应选用比导线直径（    ）的刃口。","options":["相同 ","稍大  ","较大"],"score":1},{"id":49,"key":"q-049","type":"single_choice","stem":"当电压为5V时，导体的电阻值为5欧，那么当电阻两端电压为2V时，导体的电阻值为（     ）欧。","options":["10","5","2","2.5"],"score":1},{"id":50,"key":"q-050","type":"single_choice","stem":"一台计算机的IP地址为192.168.1.10，子网掩码为255.255.255.0，下列选项可访问的计算机IP是？","options":["192.168.1.20","192.168.1.255","192.168.2.10","192.168.0.5"],"score":1},{"id":51,"key":"q-051","type":"single_choice","stem":"一度电可供\"220V,40W\"的灯泡正常发光的时间是？","options":["2.5小时","20小时","25小时","250小时"],"score":1},{"id":52,"key":"q-052","type":"single_choice","stem":"根据米波调频广播发射机技术要求与测量方法(GY/T169-2001)，立体声广播导频信号频率偏差在（ ）内。","options":["±1Hz","±10Hz","+100Hz","±1000Hz"],"score":1},{"id":53,"key":"q-053","type":"single_choice","stem":"安全播出是指在广播电视节目播出、传输过程中的（ ）和（ ）。","options":["节目完整，信号安全","节目完整，技术安全","信号安全，技术安全"],"score":1},{"id":54,"key":"q-054","type":"single_choice","stem":"下面几种编码中，属于信道编码的是（ ）。","options":["MPEG1","MPEG2","AVS+","误差控制编码"],"score":1},{"id":55,"key":"q-055","type":"single_choice","stem":"一台电动机的型号为“YL180L-8’,它是什么类型的电机","options":["同步电动机","异步电动机","直流发电机","直流电动机"],"score":1},{"id":56,"key":"q-056","type":"single_choice","stem":"运维与技术管理 应遵循《广播电视发射台运行维护规程》(GY/T179)相关规定，按照广播影视行政部门批准的节目、频率(频道)、功率及其他技术参数（  ）地发射广播电视节目。","options":["满时间、满功率、满人员","满时间、满功率、满调制","满时间、满调制、满人员","满功率、满状态、满人员"],"score":1},{"id":57,"key":"q-057","type":"single_choice","stem":"根据标准，发射台的播出质量事故历时与分类的判定和故障处理定额是由哪个部门审核和判定的？","options":["运行主管部门","技术主管","机房主管","台长"],"score":1},{"id":58,"key":"q-058","type":"single_choice","stem":"微波在无线电频谱中是指波长为______的无线电波。","options":["1m至1mm ","10m至1m ","100m至1km"," 1km至10m "],"score":1},{"id":59,"key":"q-059","type":"single_choice","stem":"电烙铁用于（    ）导线接头等。","options":["铜焊 ","锡焊  ","铁焊"],"score":1},{"id":60,"key":"q-060","type":"single_choice","stem":"在电击事故当中伤害程度最大、危险性最高的是:（ ）。","options":["左手至脚","右手至脚","左手至右手","左脚至右脚"],"score":1},{"id":61,"key":"q-061","type":"single_choice","stem":"增益和损耗的单位均可用（ ）表示。","options":["Hz","dB","W","G"],"score":1},{"id":62,"key":"q-062","type":"single_choice","stem":"弹簧操动机构的操作电源是什么？","options":["必须是直流电源","必须是交流电源","既可以是直流电源，也可以是交流电源"],"score":1},{"id":63,"key":"q-063","type":"single_choice","stem":"下列不是我台尧山站发送的桂林本地调频广播的是（）","options":["FM97.7","FM88.3","FM91.2","FM89.8"],"score":1},{"id":64,"key":"q-064","type":"single_choice","stem":"降雨对微波通信的影响，微波频率越高雨衰越（  ）。","options":["大","小","随机","不变"],"score":1},{"id":65,"key":"q-065","type":"single_choice","stem":"电网谐波的产生，主要在于电力系统中存在各种（ ）元件。","options":["电感元件","电容元件","非线性元件","三相参数不对称"],"score":1},{"id":66,"key":"q-066","type":"single_choice","stem":"中国数字调频广播CDR采用的调制模式为（ ）。","options":["FSK","ASK","PSK","QPSK"],"score":1},{"id":67,"key":"q-067","type":"single_choice","stem":"在广播电视发射系统中，天线高度的选择会对信号传输有什么影响？","options":["不会影响信号传输","会影响信号传输距离和覆盖范围","会影响信号的频率","会影响信号的幅度"],"score":1},{"id":68,"key":"q-068","type":"single_choice","stem":"下列那些关于密码安全的说法是错误的？","options":["密码越长越复杂越安全","定期更改密码有助于提高安全性","使用“password”作为密码是安全的做法","使用多因素身份验证可以增加安全性"],"score":1},{"id":69,"key":"q-069","type":"single_choice","stem":"在数字传输系统中，通常（ ）用于地面传输，QPSK用于卫星传输。","options":["DSB-SC","QAM","PDM","PSM"],"score":1},{"id":70,"key":"q-070","type":"single_choice","stem":"安全播出责任单位应当在事件事故发生()小时内将快速报告单上报至当地安全播出管理部门和监测监管部门.","options":["1小时","2小时","3小时","4小时"],"score":1},{"id":71,"key":"q-071","type":"single_choice","stem":"属于控制电器的是（     ）。","options":["接触器 ","熔断器 ","刀开关"],"score":1},{"id":72,"key":"q-072","type":"single_choice","stem":"两臂长度（   ）的振子叫做对称振子。当两臂总长为半个波长时，叫（   ）波振子。","options":["相等    全","不等    半","相等    半","不等   全"],"score":1},{"id":73,"key":"q-073","type":"single_choice","stem":"在接收星座图中，由于（ ）的影响，会使原本呈正方形分布的理想星座点在实际观测中倾斜挤压，变成了菱形。","options":["增益压缩","幅度不平衡","正交不平衡","载波泄漏"],"score":1},{"id":74,"key":"q-074","type":"single_choice","stem":"如果我台UPS告警提示“输入电压过压”应该采取什么措施？","options":["检查主路输入电压","更换功率单元或模块","检查是否带的负载过大","检查电池设置节数是否正确"],"score":1},{"id":75,"key":"q-075","type":"single_choice","stem":"衡量数字系统可靠性的主要指标是（     ）","options":["信息传输速率","符号传输速率","频带利用率","误码率"],"score":1},{"id":76,"key":"q-076","type":"single_choice","stem":"380V/220V低压系统，遭受两相电击时，加在人体的电压约为（ ）。","options":["220V","380V","10KV","35KV"],"score":1},{"id":77,"key":"q-077","type":"single_choice","stem":"恢复节目信号播出时，应当优先保障主频率主频道节目的播出，遵循“（   ）”的原则。   ","options":["先中央、后地方;先公益、后付费","先地方、后中央;先付费、后公益","先中央、后地方;先付费、后公益","先地方、后中央;先公益、后付费"],"score":1},{"id":78,"key":"q-078","type":"single_choice","stem":"如果空收尧山广播无信号，且尧山微波监测反传信号存在，这表明故障可能在哪个环节？","options":["微波信号源输出至发射机","甲山至尧山的微波","值班室微波调制解调器","尧山发射台站的NEC室内机"],"score":1},{"id":79,"key":"q-079","type":"single_choice","stem":"某发射机稳定工作时，测得其输入电压为220V，电流为15A，在发射机总输出端，通过衰减20dB的耦合检测口测量到的功率为6.6W，该发射机的工作效率为（ ）。","options":["2%","3%","20%","30%"],"score":1},{"id":80,"key":"q-080","type":"single_choice","stem":"在进行电工作业时，以下哪种做法是正确的？","options":["在潮湿的环境下使用电器工具","不戴绝缘手套进行电线接线","在操作电器之前断电","使用损坏的电线进行电路连接"],"score":1},{"id":81,"key":"q-081","type":"single_choice","stem":"根据标准，发射台的设备大修、技改和更新的申请报告应包含哪些内容？","options":["需要大修、技改或更新的原因","减少或停止运行时间和理由","涉及的范围、方案和所需经费","所有以上内容"],"score":1},{"id":82,"key":"q-082","type":"single_choice","stem":"在发射机常见故障处理方法中，如果发射机激励器无音频输入，应首先检查什么？","options":["发射机的电源","前端多路信号情况","天馈线接口","发射机的输出功率"],"score":1},{"id":83,"key":"q-083","type":"single_choice","stem":"根据米波调频广播发射机技术要求与测量方法(GY/T169-2001)，立体声广播左、右声道的分离度100%调制时，（ ）dB。","options":["大于20","大于30","大于40","大于50"],"score":1},{"id":84,"key":"q-084","type":"single_choice","stem":"电流的实际方向是（ ）。","options":["电子流的方向","正电荷运动的方向","负电荷运动的方向"],"score":1},{"id":85,"key":"q-085","type":"single_choice","stem":"连接到internet的计算机中，必须安装的协议是（    ）。","options":["TCP/IP","spss协议","双边协议","NetBEUI协议 "],"score":1},{"id":86,"key":"q-086","type":"single_choice","stem":"串联谐振是指电路呈纯（ ）性。","options":["电阻","电容","电感","电抗"],"score":1},{"id":87,"key":"q-087","type":"single_choice","stem":"TR101-290 错误监测中（ ）级别的错误对播出影响最大。","options":["第一级","第二级","第三级","每级都一样"],"score":1},{"id":88,"key":"q-088","type":"single_choice","stem":"对220V/380V中性点直接接地低压系统，如人体电阻为1000Ω，则遭受单相电击时，通过人体的电流约为（ ）。","options":["30mA","220mA","380mA","1000mA"],"score":1},{"id":89,"key":"q-089","type":"single_choice","stem":"在台站维护过程中，我们可以用以下哪种仪器来判断天馈系统的好坏（ ）。","options":["频谱仪","示波器","矢量网络分析仪","地阻仪"],"score":1},{"id":90,"key":"q-090","type":"single_choice","stem":"电压互感器的一次绕组的匝数（ ）二次绕组的匝数。","options":["大于","远大于","小于","远小于"],"score":1},{"id":91,"key":"q-091","type":"multiple_choice","stem":"对数字传输系统而言，最重要的性能指标是（ ）。","options":["抖动","信噪比","可靠性","误码率"],"score":1},{"id":92,"key":"q-092","type":"multiple_choice","stem":"某转播台的调频信号源切换器全部通信不上，可能的原因是（ ）。","options":["切换器地址错误","调谐器串口损坏","某台切换器通讯线松动","信号源主控里的切换器IP地址设置错误"],"score":1},{"id":93,"key":"q-093","type":"multiple_choice","stem":"电击伤害的影响因素主要有（ ）。","options":["电流强度及电流持续时间","人体电阻","作用于人体电压","电流途径","电流种类及频率的影响","人体状态的影响"],"score":1},{"id":94,"key":"q-094","type":"multiple_choice","stem":"数字调制分为（ ）。","options":["ASK","DSK","FSK","PSK"],"score":1},{"id":95,"key":"q-095","type":"multiple_choice","stem":"电路的工作状态有（ ）。","options":["通路","接触不良","开路","短路"],"score":1},{"id":96,"key":"q-096","type":"multiple_choice","stem":"接地线的作用是（ ）。","options":["当工作地点突然来电时，能防止工作人员遭受电击伤害;","当停电设备突然来电时，接地线造成三相短路，使保护动作，消除来电","泻放停电设备由于各种原因产生的电荷,","与大地绝缘;"],"score":1},{"id":97,"key":"q-097","type":"multiple_choice","stem":"正弦交流电的三要素是指正弦量的（ ）。","options":["相位","最大值","角频率","角度","初相角"],"score":1},{"id":98,"key":"q-098","type":"multiple_choice","stem":"测向方法主要有（ ）。","options":["多普勒效应法","相位调制法","定向天线法","正交幅度调制法"],"score":1},{"id":99,"key":"q-099","type":"multiple_choice","stem":"防止人身电击的接地保护包括（ ）。","options":["保护接地","零序接地","工作接地","过电流"],"score":1},{"id":100,"key":"q-100","type":"multiple_choice","stem":"架空电力线路验电时应注意（ ）。","options":["先验低压，后验高压","先验高压，后验低压","先验远侧，后验近侧","先验近侧，后验远侧","先验上层，后验下层","先验下层，后验上层"],"score":1}]}